0902552766
Thảm chống trơn trượt 3M 3200

Lõi lọc giấy xếp Graver

Thảm chống trơn trượt 3M 3200
Ngày đăng: 23-08-2014
2,103 lượt xem
“Absolute” Rated High Performance Pleated
Polypropylene Filter Cartridge
This filter is constructed with a high surface area melt
blown polypropylene media for low initial pressure drop,
high dirt holding capacity, and high efficiency performance.
Features–Benefits
• Micron ratings from 0.2 to 20 μm – Broad application
range
• “Absolute” Efficiency – Rated at 99.98% (Beta 5000)
• High surface area – High flow rate, and long service life
– Minimize maintenance cost
• Fixed Pore construction – Resists dirt unloading at
maximum differential pressure
• Polypropylene Construction – Inert to many process
fluids
• Various Gasket/O-ring materials – Compatible with
many fluids
• Heavy duty molded cage – High structural strength
• Highly consistent melt blown media for consistent
performance
 
Product Specifications
Construction material: Polypropylene
Gaskets/O-Rings: Buna-N, EPDM, Silicone, Viton, Teflon
Encapsulated Viton (O-Rings only),
Teflon (gasket only)
Micron ratings: 0.2, 0.45, 1.0, 2.5, 5.0, 10, 20 μm
Dimensions
Nominal lengths: 5", 9.75", 10", 20", 30", 40"
(12.7, 24.8, 25.4, 50.8, 76.2, 101.6 cm)
Outside diameter: 2.7" (6.86 cm)
Inside diameter: 1.0" (2.54 cm)
Surface area: up to 7.0 ft 2. (0.65 m2)
Operating Parameters
Maximum operating
temperature: 176°F (80°C)
Maximum differential 75 psid @ 70°F (5.2 bar @ 21°C)
pressure: 40 psid @ 176°F (2.8 bar @ 80°C)
Recommended
change-out pressure: 35 psid (2.4 bar)
 
Performance Specifications
Cleaning/Sanitization
Compatible with most common chemical cleaning,
sanitizing and sterilizing agents and with pH range from
1–14. Consult factory for specific compatibility information.
Cartridge will withstand hot water at 176°F (80°C) at 5 psid
(0.35 bar) for 30 minutes.
 
Typical Applications
• Food & beverage
• Aqueous solutions
• Chemicals
• Bottled water
• Pharmaceuticals
• Cosmetics
• Process water
• RO Prefilters • Inks
Steam/Autoclave
Cartridges may be autoclaved for 30 minutes at 250 °F
(121°C) under no end load conditions. Cartridges fitted with
steam insert may be steamed for at least 10 thirty minute
cycles @ 275°F (135°C) not to exceed 3 psid (0.21 bar).
 
Certifications
USP Class VI - Meets USP Class VI Biological Test for
Plastics.
FDA Listed Materials - All Materials comply with FDA
Title 21 of the Code of Federal Regulations Sections
174.5, and 177.1520, as applicable for food and
beverage contact.
European Directive for Direct Food Contact -
European Regulations No 1935/2004 and European
directive 82/711/EEC: Tested for migration behavior in
direct food contact. Minimal rinse required for use. Data
available upon request.
Endotoxin level - Limulus Amebocyte Lysate CB028
test indicated bacterial endotoxins were not present in
distilled water at 0.25 EU / ml.
Extractable content - Test indicate that Non-Volatile
Residue, Residue on Ignition and Heavy Metals meet
USP limits.

⇒ Các lõi lọc chất lỏng khác

⇒ Lõi lọc than hoạt tính khử mùi

⇒ Các loại bình sử dụng lõi lọc

⇒ Lõi lọc hóa chất

⇒ Lõi lọc sợi quấn core inox

⇒ Lõi lọc Graver

⇒ Lõi lọc 3M

Bạn có thể tham khảo thêm các nhóm sản phẩm chính mà Đông Châu đang cung cấp, bằng cách Click vào  Hình các nhóm sản phẩm sau

 

Vải lọc chất lỏng, Túi lọc hóa chất, Giấy lọc cuộn, Màng RO, bình Pentair

 

 

Sản phẩm lọc bụi - lọc khí - khử mùi

 

 

Sản phẩm keo dán 3M, Băng keo điện 3M, Băng keo cường lực 3M

 

 

Sản phẩm Bảo hộ Lao động

 

Liên hệ: 028 6270 2191  - 028 6297 9478

Email: lienhe@dongchau.net

Tin liên quan

Bình luận (0)


Gửi bình luận của bạn

Captcha

IMGROUP

Tìm