0902552766
Thảm chống trơn trượt 3M 3200

Lõi lọc Graver xếp khía lưu lượng lớn

Thảm chống trơn trượt 3M 3200
Ngày đăng: 23-08-2014
2,705 lượt xem
Large Geometry Pleated Filters for High Flow
Graver High Flow GF Series filters feature microfiberglass
media in a larger geometry to handle higher flows with
fewer filter elements. The result is much faster, easier filter
changeouts. In addition, the inside to outside flow allows
for excellent dirt holding capacity, extending the time
between filter changeouts. Filter housings are also
available and because of the filters high flow and dirt
holding capacity, smaller systems are possible, reducing
upfront capital costs.
 
Features - Benefits
• Materials of construction allow compatibility with some
chemistries not served by all polypropylene elements.
• 6" diameter, large geometry for high flows
• Absolute retention ratings from 1 to 20 microns
• Capable of flow rates up to 500 GPM in a single 60"
element
• Inside-out flow retains contaminant even during
changeout
• Outer cage prevents media extrusion problem
experienced with some competitive offerings
• Unique Quad Seal gasket provides maximum seal
integrity
• Retrofits competitive high flow filter housings
• Thermally bonded construction
Product Specifications
Media: Microfiberglass
Support/Cage: Polyester or polypropylene
End caps: Polyacetal or polypropylene
O-Rings: EPDM, Silicone, Buna-N, Viton
Micron ratings: 1, 2.5, 4.5, 10, 20 μm
Dimensions
Nominal lengths: 20", 40", 60"
(50.8, 101.6, 152.4 cm)
Outside diameter: 6.0" (15.2 cm)
Surface area: 24 ft 2. (2.2 m2) per 20" element
49 ft 2. (4.6 m2) per 40" element
73 ft 2. (6.8 m2) per 60" element
 
Operating Parameters
Maximum operating temperature:
polyacetal hardware - 70°F @ 75 psid (21°C @ 5.2 bar)
230°F @ 50 psid (110°C @ 3.4 bar)
polypropylene hardware - 77°F @ 50 psid (25°C @ 3.4 bar)
180°F @ 20 psid (82°C @1.4 bar)
Recommended changeout
differential pressure: 35 psid (2.4 bar)
Maximum flow rates: 60" element up to 500 GPM (1892 lpm)
40" element up to 350 GPM (1325 lpm)
20" element up to 175 GPM (662 lpm)
* Consult factory for sizing assistance based on particle loads.
 
Typical Applications
• Fuel Oil
• Chemicals
• Petrochemicals
• Solvents
• Oil & Gas
 
For more information
Graver Technologies Customer Service: 1-888-353-0303
Technical Support: 1-888-353-0303
E-mail us at info@gravertech.com
Graver Technologies Europe (UK): +44-1424-777791
All information and recommendations appearing in this bulletin concerning the use
of products described herein are based on tests believed to be reliable. However, it
is the user’s responsibility to determine the suitability for his own use of such products.
Since the actual use by others is beyond our control, no guarantee, expressed
or implied, is made by Graver Technologies as to the effects of such use or the results
to be obtained. Graver Technologies assumes no liability arising out of the use by others
of such products. Nor is the information herein to be construed as absolutely complete,
since additional information may be necessary or desirable when particular or
exceptional conditions or circumstances exist or because of applicable laws or government
regulations

 

 

⇒ Các lõi lọc chất lỏng khác

⇒ Lõi lọc than hoạt tính khử mùi

⇒ Các loại bình sử dụng lõi lọc

⇒ Lõi lọc hóa chất

⇒ Lõi lọc sợi quấn core inox

⇒ Lõi lọc Graver

⇒ Lõi lọc 3M

Bạn có thể tham khảo thêm các nhóm sản phẩm chính mà Đông Châu đang cung cấp, bằng cách Click vào  Hình các nhóm sản phẩm sau

 

Vải lọc chất lỏng, Túi lọc hóa chất, Giấy lọc cuộn, Màng RO, bình Pentair

 

 

Sản phẩm lọc bụi - lọc khí - khử mùi

 

 

Sản phẩm keo dán 3M, Băng keo điện 3M, Băng keo cường lực 3M

 

 

Sản phẩm Bảo hộ Lao động

 

Liên hệ: 028 6270 2191  - 028 6297 9478

Email: lienhe@dongchau.net

Tin liên quan

Bình luận (0)


Gửi bình luận của bạn

Captcha

IMGROUP

Tìm